Fobo and Compatible Hardware
Supported Cameras
- Canon EOS Rebel SL1
- Canon EOS Rebel SL2
- Limited support for other Canon EOS Rebel models
- Rebel T3i
- Rebel T5i
- Rebel XS
- Looking for other camera models? Contact us: info@fobo.co
Supported Printers
- DNP Printers
- DS620A https://www.bhphotovideo.com/c/product/1117216-REG/dnp_ds620a_dye_sublimation_photo.html
- DS40 https://www.bhphotovideo.com/bnh/controller/home?O=productlist.jsp&A=details&Q=&sku=770287&is=REG&fromDisList=y
- RX1HS https://www.bhphotovideo.com/c/product/1264019-REG/dnp_ds_rx1hs_dye_sublimation_printer.html
- Primera Impressa IP60 https://www.bhphotovideo.com/c/product/1431892-REG/primera_81001_impressa_ip60_photo_printer.html
Necessary Adapters
The Fobo App connects to the Fobo Brain via an Ethernet Cable. See the diagram above. This requires different adapters depending on what kind of iPad you have. The goal is to get from the charging port of your iPad to the Ethernet Port of the Fobo Brain.
For an iPad with a lightning port:
- Apple Lightning to USB 3 Camera Adapter
- Compatible USB to Ethernet adapter
For an iPad with a USB-C port:
- USB-C to USB-A adapter with charging port
- Compatible USB to Ethernet adapter
Apple Lightning to USB 3 Camera Adapter
https://www.apple.com/shop/product/MK0W2AM/A/lightning-to-usb-3-camera-adapter
Apple USB-C AV Multiport Adapter
https://www.apple.com/shop/product/MJ1K2AM/A/usb-c-digital-av-multiport-adapter
Compatible USB to Ethernet adapters
Apple USB to Ethernet adapter https://www.apple.com/shop/product/MC704LL/A/apple-usb-ethernet-adapter
Anker USB to Ethernet adapter https://www.anker.com/products/A7610011
Anker USB Hub with Ethernet https://www.anker.com/products/A7522012
More info about using USB with iPad: https://support.apple.com/en-us/HT209186
A note about your iPad power supply
Be sure to use a power supply “strong” enough for your device. For example, iPad Mini 4 requires a 12W power supply. Using a 10W power supply (or using an off-brand power supply that isn't truly 12W) with the iPad Mini 4 will cause malfunctions. Using a power supply that is rated for a “higher” wattage is fine.
A note about using ferrite cores with USB cables
It is highly recommended that any USB cables you use with your camera or printer should include a ferrite core. See the illustration below. This “core” will reduce the “interference” or “noise” that otherwise will be picked up by nearby signals, like electric motors, two-way radios, WiFi routers or bluetooth devices. These cores can be purchased online or from us. Just let us know if you need to order some: sales@fobo.co